Inheritance diagram for AnimatSim::Robotics::PassThroughLinkage:

Collaboration diagram for AnimatSim::Robotics::PassThroughLinkage:

Public Member Functions
virtual Gain *	GetGain ()
	Gets the poitner to the gain function. More...

virtual void	Load (CStdXml &oXml)

virtual void	QueryProperties (CStdPtrArray< TypeProperty > &aryProperties)
	Queries this object for a list of properties that can be changed using SetData. More...

virtual bool	SetData (const std::string &strDataType, const std::string &strValue, bool bThrowError=true)
	Set a variable based on a string data type name. More...

virtual void	SetGain (Gain *lpGain)

Public Member Functions inherited from AnimatSim::Robotics::RemoteControlLinkage
virtual float	AppliedValue ()

virtual void	AppliedValue (float fltVal)

virtual float *	GetDataPointer (const std::string &strDataType)
	Returns a float pointer to a data item of interest in this object. More...

virtual void	Initialize ()
	Initializes this object. More...

virtual bool	InLink ()
	Gets the inlink value. More...

virtual void	InLink (bool bVal)
	Sets the inlink property. More...

virtual void	ParentRemoteControl (RemoteControl *lpParent)

virtual RemoteControl *	ParentRemoteControl ()

virtual int	PropertyID ()

virtual void	PropertyID (int iID, bool bCreateDataTypes=true)

virtual std::string	PropertyName ()
	Gets the property name. More...

virtual void	PropertyName (std::string strName)
	Sets the property name. More...

virtual void	ResetSimulation ()
	Resets the simulation back to time 0. More...

virtual void	SetupIO ()
	This method is called after all connections to whatever control board have been made. It calls each parts SetupIO method. For example, We connect to a Firmata microcontroller like an Arduino, and then do a setup that could take some time. We should not attempt to setup any of the pins until after the board itself has been setup. After that we need to loop through and setup all the parts. More...

virtual void	ShutdownIO ()
	This method is called just before the IO thread is closed down. It gives the IO objects a chance to do any required cleanup. More...

virtual std::string	SourceDataTypeID ()
	Gets the target data type. More...

virtual void	SourceDataTypeID (std::string strTypeID)
	Sets the target data type. More...

virtual std::string	SourceID ()
	Gets the source ID. More...

virtual void	SourceID (std::string strID)
	Sets the source ID. More...

virtual void	StepIO ()
	This method is called from within the IO thread. It calls StepIO for each part. More...

virtual void	StepSimulation ()
	Step the simulation for this object. More...

virtual std::string	TargetDataTypeID ()
	Gets the target data type. More...

virtual void	TargetDataTypeID (std::string strTypeID)
	Sets the target data type. More...

virtual std::string	TargetID ()
	Gets the target ID. More...

virtual void	TargetID (std::string strID)
	Sets the target ID. More...

Public Member Functions inherited from AnimatSim::AnimatBase
	AnimatBase ()
	Constructs an AnimatBase object. More...

virtual	~AnimatBase ()
	Destroys the AnimatBase object.. More...

virtual bool	AddItem (const std::string &strItemType, const std::string &strXml, bool bThrowError=true, bool bDoNotInit=false)
	Adds a new object to this parent. More...

virtual void	AfterResetSimulation ()
	Called after a simulation reset for some objects. More...

virtual long	CalculateSnapshotByteSize ()
	Calculates the snapshot byte size. More...

virtual void	Copy (CStdSerialize *lpSource)

virtual void	Enabled (bool bVal)
	Tells whether this item is enabled or not. This is not actually used for all objects, only specific ones. I am putting it in the base class though to prevent numerous duplications. More...

virtual bool	Enabled ()
	Tells whether this item is enabled or not. This is not actually used for all objects, only specific ones. I am putting it in the base class though to prevent numerous duplications. More...

virtual NeuralModule *	GetNeuralModule ()
	Gets the neural module. More...

virtual Node *	GetNode ()
	Gets the node. More...

virtual Simulator *	GetSimulator ()
	Gets the simulator pointer. More...

virtual Structure *	GetStructure ()
	Gets the structure for this node. More...

virtual bool	HasProperty (const std::string &strName)
	Queries this object if it has a property with the given name. More...

virtual std::string	ID ()
	Gets the unique GUID ID of this object. More...

virtual void	ID (std::string strValue)
	Sets the unique GUID ID of the object. More...

virtual void	Kill (bool bState=true)
	Kills. More...

virtual void	Load (StdUtils::CStdXml &oXml)
	Loads the item using an XML data packet. More...

virtual void	LoadKeyFrameSnapshot (byte *aryBytes, long &lIndex)
	Loads a key frame snapshot. More...

virtual std::string	Name ()
	Gets the name of this object. More...

virtual void	Name (std::string strValue)
	Sets the name of the object. Blank is acceptable. More...

virtual AnimatPropertyType	PropertyType (const std::string &strName)

virtual void	ReInitialize ()
	Re-initialize this object. More...

virtual bool	RemoveItem (const std::string &strItemType, const std::string &strID, bool bThrowError=true)
	Removes a child item from this parent. More...

virtual void	Reset ()
	Resets this object. More...

virtual void	RigidBodyAdded (std::string strID)

virtual void	RigidBodyRemoved (std::string strID)

virtual void	SaveKeyFrameSnapshot (byte *aryBytes, long &lIndex)
	Saves a key frame snapshot. More...

virtual bool	Selected ()
	Tells if this items is selected or not. More...

virtual void	Selected (bool bValue, bool bSelectMultiple)
	Selects this object. More...

virtual bool	SetData (const std::string &strDataType, const float fltValue, bool bThrowError=true)
	Set a variable based on a string data type name. More...

virtual bool	SetData (const std::string &strDataType, const long lValue, bool bThrowError=true)
	Set a variable based on a string data type name. More...

virtual void	SetSystemPointers (Simulator lpSim, Structure lpStructure, NeuralModule lpModule, Node lpNode, bool bVerify)
	Sets the system pointers. More...

virtual void	SimPausing ()
	Called just before the simulation pauses. More...

virtual void	SimStarting ()
	Called just before the simulation starts. More...

virtual void	SimStopping ()
	Called just before the simulation stops. More...

virtual void	TimeStepModified ()
	Notification method that the time step modified has been modified. Objects should recalculate any slice times as needed. More...

virtual std::string	Type ()
	returns the string type name of this object. More...

virtual void	Type (std::string strValue)
	Sets the class type for this object. More...

virtual void	VerifySystemPointers ()
	Verify that system pointers have been set correctly. More...

virtual void	VisualSelectionModeChanged (int iNewMode)
	Visual selection mode changed. More...

Static Public Member Functions
static PassThroughLinkage *	CastToDerived (AnimatBase *lpBase)

Static Public Member Functions inherited from AnimatSim::Robotics::RemoteControlLinkage
static RemoteControlLinkage *	CastToDerived (AnimatBase *lpBase)

Protected Member Functions
virtual void	AddGain (std::string strXml)
	Creates and adds a gain object. More...

virtual float	CalculateAppliedValue (float fltData)

Protected Member Functions inherited from AnimatSim::Robotics::RemoteControlLinkage
virtual void	ApplyValue (float fltData)

Protected Attributes
Gain *	m_lpGain
	Pointer to the Gain that will be used to convert the source value into the target value.

Protected Attributes inherited from AnimatSim::Robotics::RemoteControlLinkage
bool	m_bInLink

float	m_fltAppliedValue
	The total value applied during a time step.

int	m_iPropertyID

int	m_iTargetDataType
	integer index of the target data type

RemoteControl *	m_lpParentRemoteControl
	Pointer tho the parent remote control.

AnimatBase *	m_lpSource
	Source object we are inserting from.

float *	m_lpSourceData
	Pointer to the source data variable.

AnimatBase *	m_lpTarget
	Target object we are inserting into.

float *	m_lpTargetData
	Pointer to the external value of the linked target.

std::string	m_strPropertyName
	Name of the property that will be used for the data type if required.

std::string	m_strSourceDataTypeID
	ID of the source data type. This is only used during loading.

std::string	m_strSourceID
	ID of the source. This is only used during loading.

std::string	m_strTargetDataTypeID
	ID of the target data type. This is only used during loading.

std::string	m_strTargetID
	ID of the target. This is only used during loading.

Protected Attributes inherited from AnimatSim::AnimatBase
bool	m_bEnabled
	Tells if this item is enabled or not. If it is not enabled then it is not run.

bool	m_bSelected
	Tells whether the object is selected or not.

AnimatSim::Behavior::NeuralModule *	m_lpModule
	The pointer to this items parentNeuralModule. If this is not relevant for this object then this is NULL.

Node *	m_lpNode
	The pointer to this items parent Node. If this is not relevant for this object then this is NULL.

Simulator *	m_lpSim
	The pointer to a Simulation.

AnimatSim::Environment::Structure *	m_lpStructure
	The pointer to this items parent Structure. If this is not relevant for this object then this is NULL.

std::string	m_strID
	The unique Id for this object.

std::string	m_strName
	The name for this object.

std::string	m_strType
	The type for this object. Examples are Box, Plane, Neuron, etc..

Additional Inherited Members
Public Attributes inherited from AnimatSim::Robotics::RemoteControlLinkage
RemoteControlData	m_Data
	This is a set of data that is associated with this linkage.

Detailed Description

Definition at line 9 of file PassThroughLinkage.h.

Member Function Documentation

void AnimatSim::Robotics::PassThroughLinkage::AddGain ( std::string strXml )

protectedvirtual

Creates and adds a gain object.

Author: dcofer

Date: 3/2/2011

Parameters

strXml The xml data packet for loading the gain.

Definition at line 96 of file PassThroughLinkage.cpp.

References StdUtils::CStdXml::Deserialize(), StdUtils::CStdXml::FindChildElement(), StdUtils::CStdXml::FindElement(), AnimatSim::Gains::LoadGain(), and AnimatSim::AnimatBase::m_lpSim.

Referenced by SetData().

Here is the call graph for this function:

Here is the caller graph for this function:

Gain * AnimatSim::Robotics::PassThroughLinkage::GetGain ( )

virtual

Gets the poitner to the gain function.

Author: dcofer

Date: 3/18/2011

Returns: Pointer to the gain.

Definition at line 74 of file PassThroughLinkage.cpp.

References m_lpGain.

void AnimatSim::Robotics::PassThroughLinkage::QueryProperties ( CStdPtrArray< TypeProperty > & aryProperties )

virtual

Queries this object for a list of properties that can be changed using SetData.

The method provides a list of the properties that can be set using the SetData method. It gives the property name and the type of data that should be passed to it. Valid date types are Boolean, Float, Integer, and Xml.

Author: dcofer

Date: 2/22/2011

Parameters

aryNames	Array list of the property names.
strTypes	Array list of the type that is associated with the cooresponding name in the list.

Returns: Nothing.

Reimplemented from AnimatSim::Robotics::RemoteControlLinkage.

Definition at line 127 of file PassThroughLinkage.cpp.

References AnimatSim::Robotics::RemoteControlLinkage::QueryProperties().

Here is the call graph for this function:

bool AnimatSim::Robotics::PassThroughLinkage::SetData	(	const std::string &	strDataType,
		const std::string &	strValue,
		bool	bThrowError = `true`
	)

virtual

Set a variable based on a string data type name.

This is a generic method that can be used to set any variable in an AnimatBase object by specifying the name of the variable and a string representation of that data. The GUI uses this method to set data into variables in the simulation when the user changes them in the UI. The value string can be as simple as a float or int, or as complex as an xml packet. It is the developers responsibilty to know what type of data is needed and to process it accordingly.

Author: dcofer

Date: 2/22/2011

Parameters

strDataType	string name of the data type to set.
strValue	The string value of the data. It is up to the developer to determine what this should be. For example, in most cases it is simply a float and you just have to convert it to a float and make the appropriate mutator method call. However, it can be any type of string, including an entire xml packet. It is the developers responsibility to know how to set and process the data as required.
bThrowError	true to throw error if there is a problem. If false then it will not return an error, just return false.

Returns: true if it succeeds, false if it fails.

Reimplemented from AnimatSim::Robotics::RemoteControlLinkage.

Definition at line 107 of file PassThroughLinkage.cpp.

References AddGain(), AnimatSim::Robotics::RemoteControlLinkage::SetData(), and StdUtils::Std_CheckString().

Here is the call graph for this function:

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Function Documentation